Hildebrand
|
|
|
|
The main product line comprises products for measuring the hardness of rubber, plastics and other non-metallic materials. Our products are easy to use combined with high accuracy and durability. |
 |
The patented N, H, L / Durometer Hardness System provides hardness readings on elastomers and plastics with a specimen thicker than 6 mm according to IRHD and Durometer hardness. It complies to international standards DIN ISO 48, ISO 48, ASTM D 1415 and DIN 53505 more details |
 |
The MICRO IRHD SYSTEM provides hardness readings on elastomers according to MICRO IHRD. Recommended specimen thickness is 1 to 5 mm. It complies to international standards such as ISO 48 and ASTM D 1415. The MICRO IRHD SYSTEM is a hardness testing machine controlled by a Hildebrand MSWindows software. more details |
 |
Rubber Test Blocks according to MICRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually. more details |
 |
The patented O-Ring Center Device fully automatically cooperates with the MICRO IRHD SYSTEM. O-Rings with a cord dia. of 0.8 mm to 8 mm will just be placed on the measuring table and pushed to the positioning pin. The cord dia. Is keyed into the MICRO IRHD software. more details |
 |
The Center Device with sample holder fully automatically cooperates with the MICRO IRHD SYSTEM. This fixture is designed to measure O-Rings and round style parts more details |
 |
The Prism Center Device is designed to measure hoses and cables. It is cooperating with: -MICRO IRHD SYSTEM -IRHD N, H, L / DUROMETER HARDNESS more details |
|
|
The Analog durometer conforms to DIN 53505, ISO 868, ISO 7619 and ASTM D 2240. Model HD3000 offers maximum accuracy available in a dial model gauge at minimum cost. more details |
 |
The Hildebrand Digital Durometer Model HDD-1 is our latest innovation for checking the hardness of rubber, plastics and other non-metallic surfaces. The durometer conforms to DIN 53505, ISO 868, ISO 7619 and ASTM D 2240. more details |
 |
Test Blocks for Durometer more details |
 |
Durometer Calibrator Model RC-1 was designed for in-house calibration ability. The Calibrator comes with weights for calibrating the spring-load of durometers in the A, B, C, D, DO and O scales more details |
