Ray-Ran Test Equipment Ltd. Founded in 1977 and regarded as one of the principal suppliers of test equipment to the Polymer Industry. Its products can be found in over 60 different countries giving the Company a truely International presence
|
Coefficient of Friction Tester COF Sliding Friction It is measured by pulling one surface |
|
Cold Flex Temperature Tester Conforms to BS2782 : Part 1:Method 104B. Determines the effects of low temperatures on the stiffness of the polymer material |
|
Environmental Stress Cracking Conforms to ASTM D1693 standard and consists of 48 Glass Sample Tubes + Digital Temperature Controlled Bath + Nicking Jig + Bending/Transfer Tool + Stainless Steel Specimen Holders |
|
Variable Drop Height up to 2 metres + Variable Loads Between 1.25kg & 10kg + Drop Weight Automatically Raised & Solenoid Released + Various Sample Holding Fixtures Available. for example :- Pipes 20 to 400mm diameter |
|
Hardness Tester Digital Workstation, microprocessor controlled for Shore Hardness Scales - according to the Hardness Module fitted. |
|
Durometers Analogue and Digital Shore Hardness Testers for Polymer Materials - Shore Range A,B,C,D,DO,OO |
|
HDT Vicat - 2 Station HDT - Determines the temperature at which a test sample subjected to a predetermined bending stress, deflects to a set distance |
|
HDT Vicat - 4 Station HDT - Determines the temperature at which a test sample subjected to a predetermined bending stress, deflects to a set distance Vicat determines the temperature at which an indenter penetrates into the test sample when a given load is applied Complies with Standard(s) |
|
HDT Vicat - 6 Station HDT - Determines the temperature at which a test sample subjected to a predetermined bending stress, deflects to a set distance Vicat determines the temperature at which an indenter penetrates into the test sample when a given load is applied Complies with Standard(s) |
|
Brittleness Apparatus Digital controlled liquid bath+Integral stirrir+Temperature Controller+Test Specimen Punch and Die+Test Specimen+ Pendulum Striker. |
|
IZOD CHARPY IMPACT TESTER Charpy + Izod + Tension + Puncture + Component Complies with Standard(s) |
|
Puncture Impact Testing - Thin Materials Determines the energy required to puncture the material returning the results in joules |
|
Rubber Hardness Reference Blocks Durometer Hardness - Rubber Reference Blocks. Complies with Standard(s) |
|
Freezer Cabinet Free Standing Unit to -45 deg C |
|
Special Test Rig The company must produce safety certificates to show the load carrying capacity of the new polymer plank. The special test rig supports the plank at different span distances and a load is applied to the mid-point. Both the applied load and the deflection of the plank is measured up to the fracture point and the results graphically presented
|
|
Tensile Tester A standard range which provides load cells up to 10kN, Speed range 0.001 to 1,000 mm/min, Display - Full Colour Graphic Display with 46 key Alpha/Numeric keypad and dedicated UP - DOWN - STOP keys. On-board long term data storage and retieval option. Standard language options available. Power - 110/125/220/240/415 volts 50/60Hz |
|
PC Controlled Tensile Tester The PC using the well proven winTest software provides total flexability. Test methods can be stored together with the appropriate set up and the PC controls the tests and provides user defined calcuation procedures |
|
Thermal Ageing (Endurance) In Air Oven Test sample are suspended in a precisely controlled environment with temperature controlled air continually being circulated through each Test Cell at a constant flow. The Test Samples are checked for Thermal Aging at set Time Intervals and the condition recorded.
|
|
Unrestrained Linear Thermal Shrinkage Hot Plate Method Test Sample of the material is cut and its orientation with respect to the manufacturing process marked. It is then lightly coated with Silicone Oil and placed on the Hot Plate for the required time, after which its measured and the shrinkage determined. Complies with Standard(s) |
|
Unrestrained Linear Thermal Shrinkage Liquid Immersion Method Investigates the Internal Stresses induced in the Film Material as a result of the manufacturing processes. |
|
Hand Operated Cutting Press Generates up to 600kg of cutting force |
|
Pneumatic Press Generates up to 5,000kg of Cutting Force |
|
Small CNC Machine Small CNC Machine + Desk Top Mounted + Gantry Constuction + Fully guarded with up-and-over door access + Slideway movement : X=300 mm, Y=260 mm, Z= 80 mm + table size 500 mm by 440 mm + Variable Spindle Speed 8,000 to 32,000 rpm + Computer Interface with Flashcut CNC PC Software. |
|
Small Injection Moulding Apparatus Ideal for making Test Samples and Small Components. Digital Temperature Controlled Cylinder + Tool Block Heating Package + Automatic Nozzle locking +Polymer feeder Hopper + Small footprint for Bench Mounting + Low cost Tool Inserts to all International Standards + Opional Quick Change Cylinder, Nozzle and Die. |
|
Notching Cutter Variable Cutter & Traverse Speed + Automatic Cycle to Unload Position+ Micro Notch Adjustment + Multi-Sample Loading + Single or Multi Tooth Cutter + Centralisation Jig+ Dial Comparator Inspection Jig + Standard Setting Blocks+ Anti-Vibration Linear Motion Slideways Complies with Standard(s) |
|
Trammel Cutters Ideal for cutting an accurate strip of thin film material |
|
Apparent Bulk Density The apparatus consists of a funnel, stand and measuring cup. |
|
The Density Balance The Test sample is first weighed in air and again when submerged in a liquid. By determining the loss in weight which is directly proportional to the mass of the fluid it has diplaced, the specific gravity and density is readily calculated Complies with Standard(s) |
|
Digital readout Density Column A new advancement which means that density measurements can be made more quickly and more accuratly. When a sample material is placed in the density column its height in the column is measured using the trammel system "sight" and the microprocessor then calculates the corresponding density Complies with Standard(s) |
|
Melt Flow Indexer - Model 5MPCA Fully Microprocessor controlled + Multi Slicing Feature + Computer Software + Built in Printer + Large LCD + Menu Prompts + Weight Lifter (optional). Complies with Standard(s) |
|
Melt Flow Indexer - Model 5SA Semi- Automatic Apparatus to measure the Melt-Flow Indexer in grams/ 10 min Complies with Standard(s) |
|
Melt Flow Indexer - Model 5MBA Manually Operated Melt Flow Tester for Polymer materials Complies with Standard(s) |
|
Moisture Balance The Moisture content is measured by accurately weighing the loss in weight of the sample material when heated. |
